diff --git a/bash/.bash_aliases b/bash/.bash_aliases
index bc94d9a..e69de29 100644
--- a/bash/.bash_aliases
+++ b/bash/.bash_aliases
@@ -1 +0,0 @@
-alias mpv='mpv --gpu-context=wayland --hwdec=vaapi'
diff --git a/bash/.bashrc b/bash/.bashrc
index b5f36e1..eaf1355 100644
--- a/bash/.bashrc
+++ b/bash/.bashrc
@@ -25,8 +25,20 @@ export GTK_IM_MODULE=ibus
 export XMODIFIERS=@im=ibus
 export QT_IM_MODULE=ibus
 
-export VDPAU_DRIVER=va_gl
-
 export GPG_TYY=$(tty)
 
+alias rm='rm -i'
+alias nnn='nnn -e'
+alias magit='emacs -nw --eval "(magit-status)"'
+alias emac='emacsclient -nw'
+
+gpgconf --launch gpg-agent
+
+export EDITOR=/home/minhradz/.local/bin/lvim
+export NVIM_LISTEN_ADDRESS=/tmp/nvimsocket
+export MANPAGER="lvim +Man!"
+export LC_ALL=en_US.UTF-8
+
+eval "$(direnv hook bash)"
 eval "$(starship init bash)"
+export PATH="/home/minhradz/.cargo/bin;/home/minhradz/.local/bin;/home/minhradz/go/bin;/home/minhradz/.cabal/bin:$PATH"
diff --git a/cava/.config/cava/config b/cava/.config/cava/config
new file mode 100644
index 0000000..801316e
--- /dev/null
+++ b/cava/.config/cava/config
@@ -0,0 +1,161 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+bar_width = 1
+bar_spacing = 1
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+higher_cutoff_freq = 5000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa', 'fifo', 'sndio' or 'shmem'
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+method = pulse
+source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+; sample_rate = 44100
+; sample_bits = 16
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses' or 'raw'.
+# 'noncurses' uses a custom framebuffer technique and draws only changes
+# from frame to frame. 'ncurses' is default if supported
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+; method = ncurses
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+; channels = stereo
+; mono_option = average
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# ncurses output method and a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# if supported, ncurses mode will be forced on if user defined colors are used.
+# default is to keep current terminal color
+ background = default
+foreground = green
+
+# Gradient mode, only hex defined colors (and thereby ncurses mode) are supported,
+# background must also be defined in hex  or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+gradient = 1
+gradient_count = 4
+gradient_color_4 = '#a9b665'
+gradient_color_3 = '#d8a657'
+gradient_color_2 = '#e78a4e'
+gradient_color_1 = '#ea6962'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+integral = 60
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+monstercat = 1
+waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble
diff --git a/doom-emacs/.doom.d/config.el b/doom-emacs/.doom.d/config.el
index 21332d3..855186b 100644
--- a/doom-emacs/.doom.d/config.el
+++ b/doom-emacs/.doom.d/config.el
@@ -5,213 +5,72 @@
 
 
 ;; Some functionality uses this to identify you, e.g. GPG configuration, email
-;; clients, file templates and snippets.
-(setq user-full-name "minhtrannhat"
-      user-mail-address "minhtrannhat@tutanota.com")
+;; clients, file templates and snippets. It is optional.
+(setq user-full-name "John Doe"
+      user-mail-address "john@doe.com")
 
-;; Doom exposes five (optional) variables for controlling fonts in Doom. Here
-;; are the three important ones:
+;; Doom exposes five (optional) variables for controlling fonts in Doom:
 ;;
-;; + `doom-font'
-;; + `doom-variable-pitch-font'
-;; + `doom-big-font' -- used for `doom-big-font-mode'; use this for
+;; - `doom-font' -- the primary font to use
+;; - `doom-variable-pitch-font' -- a non-monospace font (where applicable)
+;; - `doom-big-font' -- used for `doom-big-font-mode'; use this for
 ;;   presentations or streaming.
-(setq doom-font (font-spec :family "JetBrainsMono Nerd Font" :size 18)
-      doom-big-font (font-spec :family "JetBrainsMono Nerd Font" :size 26)
-      doom-variable-pitch-font (font-spec :family "Overpass" :size 16)
-      doom-unicode-font (font-spec :family "JuliaMono")
-      doom-serif-font (font-spec :family "IBM Plex Mono" :weight 'light))
+;; - `doom-unicode-font' -- for unicode glyphs
+;; - `doom-serif-font' -- for the `fixed-pitch-serif' face
+;;
+;; See 'C-h v doom-font' for documentation and more examples of what they
+;; accept. For example:
+;;
+;;(setq doom-font (font-spec :family "Fira Code" :size 12 :weight 'semi-light)
+;;      doom-variable-pitch-font (font-spec :family "Fira Sans" :size 13))
+;;
+;; If you or Emacs can't find your font, use 'M-x describe-font' to look them
+;; up, `M-x eval-region' to execute elisp code, and 'M-x doom/reload-font' to
+;; refresh your font settings. If Emacs still can't find your font, it likely
+;; wasn't installed correctly. Font issues are rarely Doom issues!
 
-(setq doom-emoji-fallback-font-families nil)
-(setq doom-symbol-fallback-font-families nil)
+;; There are two ways to load a theme. Both assume the theme is installed and
+;; available. You can either set `doom-theme' or manually load a theme with the
+;; `load-theme' function. This is the default:
+(setq doom-theme 'doom-one)
 
-(setq fancy-splash-image "/home/minhradz/.doom.d/marivector.png")
-
-(defun synchronize-theme ()
-(let* ((light-theme 'doom-gruvbox-light)
-        (dark-theme 'doom-gruvbox)
-        (start-time-light-theme 6)
-        (end-time-light-theme 16)
-        (hour (string-to-number (substring (current-time-string) 11 13)))
-        (next-theme (if (member hour (number-sequence start-time-light-theme end-time-light-theme))
-                light-theme dark-theme)))
-        (when (not (equal doom-theme next-theme))
-                (setq doom-theme next-theme)
-        (load-theme next-theme t))))
-
-(setq doom-nord-light-region-highlight 't)
-
-(run-with-timer 0 900 'synchronize-theme)
-
-(setq doom-themes-enable-bold t    ; if nil, bold is universally disabled
-        doom-themes-enable-italic t) ; if nil, italics is universally disabled
-
-(with-eval-after-load 'doom-themes
-  (doom-themes-treemacs-config))
-(setq doom-themes-treemacs-theme "doom-colors")
+;; This determines the style of line numbers in effect. If set to `nil', line
+;; numbers are disabled. For relative line numbers, set this to `relative'.
+(setq display-line-numbers-type t)
 
+;; If you use `org' and don't want your org files in the default location below,
+;; change `org-directory'. It must be set before org loads!
 (setq org-directory "~/org/")
 
-(setq display-line-numbers-type 'relative)
 
-(add-hook 'spell-fu-mode-hook
-  (lambda ()
-    (spell-fu-dictionary-add (spell-fu-get-ispell-dictionary "en"))
-    (spell-fu-dictionary-add
-      (spell-fu-get-personal-dictionary "en-personal" "/home/minhradz/.aspell.en.pws"))))
-
-;; Clangd lsp for C/C++ dev
-(setq lsp-clients-clangd-args '("-j=3"
-                                "--background-index"
-                                "--clang-tidy"
-                                "--completion-style=detailed"
-                                "--header-insertion=never"
-                                "--header-insertion-decorators=0"))
-(after! lsp-clangd (set-lsp-priority! 'clangd 2))
-
-;; I mindlessly press ESC, so stop me from wreaking havoc
-(global-set-key (kbd "<escape>") 'keyboard-escape-quit)
-
-;; update the git gutter
-(custom-set-variables
- '(git-gutter:update-interval 0.02))
-
-;; ;; tree-sitter syntax highlighting
-;; (use-package! tree-sitter
-;;   :config
-;;   (require 'tree-sitter-langs)
-;;   (global-tree-sitter-mode)
-;;   (add-hook 'tree-sitter-after-on-hook #'tree-sitter-hl-mode))
-
-;; gpg
-(setq epg-pinentry-mode 'loopback)
-
-;; both jk and kj now works
-(setq evil-escape-unordered-key-sequence 't)
-
-;; org org
-(setq +latex-viewers '(zathura))
-
-;; fish fish
-(setq vterm-shell 'fish)
-
-(defun doom-modeline-conditional-buffer-encoding ()
-  "We expect the encoding to be LF UTF-8, so only show the modeline when this is not the case"
-  (setq-local doom-modeline-buffer-encoding
-              (unless (and (memq (plist-get (coding-system-plist buffer-file-coding-system) :category)
-                                 '(coding-category-undecided coding-category-utf-8))
-                           (not (memq (coding-system-eol-type buffer-file-coding-system) '(1 2))))
-                t)))
-
-(add-hook 'after-change-major-mode-hook #'doom-modeline-conditional-buffer-encoding)
-
-(after! company
-  (setq company-idle-delay 1)
-  (add-hook 'evil-normal-state-entry-hook #'company-abort)) ;; make aborting less annoying.
-
-(use-package all-the-icons-ivy-rich
-  :init (all-the-icons-ivy-rich-mode 1))
-
-(use-package ivy-rich
-  :init (ivy-rich-mode 1))
-
-(setq-default history-length 1000)
-(setq-default prescient-history-length 1000)
-
-;; Whether display the icon for `major-mode'. It respects `doom-modeline-icon'.
-(setq doom-modeline-major-mode-icon t)
-
-;; Whether display the colorful icon for `major-mode'.
-;; It respects `all-the-icons-color-icons'.
-(setq doom-modeline-major-mode-color-icon t)
-
-;; Whether display the icon for the buffer state. It respects `doom-modeline-icon'.
-(setq doom-modeline-buffer-state-icon t)
-
-;; Whether display the modification icon for the buffer.
-;; It respects `doom-modeline-icon' and `doom-modeline-buffer-state-icon'.
-(setq doom-modeline-buffer-modification-icon t)
-
-;; Whether to use unicode as a fallback (instead of ASCII) when not using icons.
-(setq doom-modeline-unicode-fallback nil)
-
-;; Whether display the minor modes in the mode-line.
-(setq doom-modeline-minor-modes nil)
-
-(use-package! websocket
-    :after org-roam)
-
-(use-package! org-roam-ui
-    :after org-roam
-    :config
-    (setq org-roam-ui-sync-theme t
-          org-roam-ui-follow t
-          org-roam-ui-update-on-save t
-          org-roam-ui-open-on-start t))
-
-(setq org-roam-dailies-directory "daily/")
-
-(setq org-roam-dailies-capture-templates
-      '(("d" "default" entry
-         "* %?"
-         :target (file+head "%<%Y-%m-%d>.org"
-                            "#+title: %<%Y-%m-%d>\n* What I did today\n* What was on my mind"))))
-
-(defun org-roam-rg-search ()
-  "Search org-roam directory using consult-ripgrep. With live-preview."
-  (interactive)
-  (let ((consult-ripgrep-command "rg --null --ignore-case --type org --line-buffered --color=always --max-columns=500 --no-heading --line-number . -e ARG OPTS"))
-    (consult-ripgrep org-roam-directory)))
-
-(map! :leader
-        :desc "Search org-roam with consult-ripgrep"
-        "n r F" #'org-roam-rg-search)
-
-;; Function for inserting node into Org Roam
-(defun org-roam-node-insert-immediate (arg &rest args)
-  (interactive "P")
-  (let ((args (cons arg args))
-        (org-roam-capture-templates (list (append (car org-roam-capture-templates)
-                                                  '(:immediate-finish t)))))
-    (apply #'org-roam-node-insert args)))
-
-(map! :leader
-        :desc "Insert node immediately"
-        "n r I" #'org-roam-node-insert-immediate)
-
-(setq avy-all-windows 't)
-
-;; Disables lsp-signature-auto-activate
-;; Looking at you, rustic mode
-(after! lsp-mode
-  (setq lsp-signature-auto-activate nil))
-
-;; this never worked lol
-(lsp-treemacs-sync-mode 1)
-
-;; bitmap very funni
-(setq highlight-indent-guides-method 'bitmap)
-
-;; magit delta looks so good
-(add-hook 'magit-mode-hook (lambda () (magit-delta-mode +1)))
-
-;; keybind to disable search highlighting (like :set noh)
-(map! :leader
-      :desc "Clear search highlight"
-      "s c"
-      #'evil-ex-nohighlight)
-
-;; We do a little bit of finger pointing
-(use-package blamer
-  :bind (("s-i" . blamer-show-commit-info))
-  :defer 20
-  :custom
-  (blamer-idle-time 0.3)
-  (blamer-min-offset 40)
-  :custom-face
-  (blamer-face ((t :foreground "#7a88cf"
-                    :background nil
-                    :height 110
-                    :italic t)))
-  :config
-  (global-blamer-mode 1))
+;; Whenever you reconfigure a package, make sure to wrap your config in an
+;; `after!' block, otherwise Doom's defaults may override your settings. E.g.
+;;
+;;   (after! PACKAGE
+;;     (setq x y))
+;;
+;; The exceptions to this rule:
+;;
+;;   - Setting file/directory variables (like `org-directory')
+;;   - Setting variables which explicitly tell you to set them before their
+;;     package is loaded (see 'C-h v VARIABLE' to look up their documentation).
+;;   - Setting doom variables (which start with 'doom-' or '+').
+;;
+;; Here are some additional functions/macros that will help you configure Doom.
+;;
+;; - `load!' for loading external *.el files relative to this one
+;; - `use-package!' for configuring packages
+;; - `after!' for running code after a package has loaded
+;; - `add-load-path!' for adding directories to the `load-path', relative to
+;;   this file. Emacs searches the `load-path' when you load packages with
+;;   `require' or `use-package'.
+;; - `map!' for binding new keys
+;;
+;; To get information about any of these functions/macros, move the cursor over
+;; the highlighted symbol at press 'K' (non-evil users must press 'C-c c k').
+;; This will open documentation for it, including demos of how they are used.
+;; Alternatively, use `C-h o' to look up a symbol (functions, variables, faces,
+;; etc).
+;;
+;; You can also try 'gd' (or 'C-c c d') to jump to their definition and see how
+;; they are implemented.
diff --git a/doom-emacs/.doom.d/custom.el b/doom-emacs/.doom.d/custom.el
deleted file mode 100644
index e98d1cf..0000000
--- a/doom-emacs/.doom.d/custom.el
+++ /dev/null
@@ -1,29 +0,0 @@
-(put 'customize-group 'disabled nil)
-(custom-set-variables
- ;; custom-set-variables was added by Custom.
- ;; If you edit it by hand, you could mess it up, so be careful.
- ;; Your init file should contain only one such instance.
- ;; If there is more than one, they won't work right.
- '(TeX-command-BibTeX "Biber")
- '(custom-safe-themes
-   '("7eea50883f10e5c6ad6f81e153c640b3a288cd8dc1d26e4696f7d40f754cc703" "5784d048e5a985627520beb8a101561b502a191b52fa401139f4dd20acb07607" "e3b2bad7b781a968692759ad12cb6552bc39d7057762eefaf168dbe604ce3a4b" "1704976a1797342a1b4ea7a75bdbb3be1569f4619134341bd5a4c1cfb16abad4" "d268b67e0935b9ebc427cad88ded41e875abfcc27abd409726a92e55459e0d01" default))
- '(git-gutter:update-interval 1)
- '(smtpmail-smtp-server "smtp.gmail.com")
- '(smtpmail-smtp-service 25)
- '(warning-suppress-log-types '((iedit) (iedit) (iedit) (iedit) (iedit) (iedit) (iedit)))
- '(warning-suppress-types
-   '((org-element-cache)
-     (org-load-hook)
-     (org-load-hook)
-     (iedit)
-     (iedit)
-     (iedit)
-     (iedit)
-     (iedit)
-     (iedit))))
-(custom-set-faces
- ;; custom-set-faces was added by Custom.
- ;; If you edit it by hand, you could mess it up, so be careful.
- ;; Your init file should contain only one such instance.
- ;; If there is more than one, they won't work right.
- )
diff --git a/doom-emacs/.doom.d/init.el b/doom-emacs/.doom.d/init.el
index 2f7babb..bc5b623 100644
--- a/doom-emacs/.doom.d/init.el
+++ b/doom-emacs/.doom.d/init.el
@@ -1,9 +1,11 @@
 ;;; init.el -*- lexical-binding: t; -*-
+
 ;; This file controls what Doom modules are enabled and what order they load
 ;; in. Remember to run 'doom sync' after modifying it!
+
 ;; NOTE Press 'SPC h d h' (or 'C-h d h' for non-vim users) to access Doom's
-;;      documentation. There you'll find a "Module Index" link where you'll find
-;;      a comprehensive list of Doom's modules and what flags they support.
+;;      documentation. There you'll find a link to Doom's Module Index where all
+;;      of our modules are listed, including what flags they support.
 
 ;; NOTE Move your cursor over a module's name (or its flags) and press 'K' (or
 ;;      'C-c c k' for non-vim users) to view its documentation. This works on
@@ -21,42 +23,42 @@
        company           ; the ultimate code completion backend
        ;;helm              ; the *other* search engine for love and life
        ;;ido               ; the other *other* search engine...
-       ivy               ; a search engine for love and life
-       ;;vertico           ; the search engine of the future
+       ;;ivy               ; a search engine for love and life
+       vertico           ; the search engine of the future
 
        :ui
        ;;deft              ; notational velocity for Emacs
        doom              ; what makes DOOM look the way it does
        doom-dashboard    ; a nifty splash screen for Emacs
        doom-quit         ; DOOM quit-message prompts when you quit Emacs
-       (emoji +unicode)  ; 🙂
+       ;;(emoji +unicode)  ; 🙂
        hl-todo           ; highlight TODO/FIXME/NOTE/DEPRECATED/HACK/REVIEW
        ;;hydra
-       indent-guides     ; highlighted indent columns
-       ligatures         ; ligatures and symbols to make your code pretty again
+       ;;indent-guides     ; highlighted indent columns
+       ;;ligatures         ; ligatures and symbols to make your code pretty again
        ;;minimap           ; show a map of the code on the side
-       modeline                 ; snazzy, Atom-inspired modeline, plus API
+       modeline          ; snazzy, Atom-inspired modeline, plus API
        ;;nav-flash         ; blink cursor line after big motions
        ;;neotree           ; a project drawer, like NERDTree for vim
        ophints           ; highlight the region an operation acts on
        (popup +defaults)   ; tame sudden yet inevitable temporary windows
        ;;tabs              ; a tab bar for Emacs
-       (treemacs +lsp)          ; a project drawer, like neotree but cooler
-       unicode           ; extended unicode support for various languages
+       ;;treemacs          ; a project drawer, like neotree but cooler
+       ;;unicode           ; extended unicode support for various languages
        vc-gutter         ; vcs diff in the fringe
        vi-tilde-fringe   ; fringe tildes to mark beyond EOB
-       (window-select +numbers)     ; visually switch windows
+       ;;window-select     ; visually switch windows
        workspaces        ; tab emulation, persistence & separate workspaces
-       zen               ; distraction-free coding or writing
+       ;;zen               ; distraction-free coding or writing
 
        :editor
        (evil +everywhere); come to the dark side, we have cookies
        file-templates    ; auto-snippets for empty files
        fold              ; (nigh) universal code folding
-       (format +onsave)  ; automated prettiness
+       ;;(format +onsave)  ; automated prettiness
        ;;god               ; run Emacs commands without modifier keys
        ;;lispy             ; vim for lisp, for people who don't like vim
-       multiple-cursors  ; editing in many places at once
+       ;;multiple-cursors  ; editing in many places at once
        ;;objed             ; text object editing for the innocent
        ;;parinfer          ; turn lisp into python, sort of
        ;;rotate-text       ; cycle region at point between text candidates
@@ -64,114 +66,115 @@
        ;;word-wrap         ; soft wrapping with language-aware indent
 
        :emacs
-       (dired +icons +ranger)    ; making dired pretty [functional]
+       dired             ; making dired pretty [functional]
        electric          ; smarter, keyword-based electric-indent
-       ibuffer           ; interactive buffer management
+       ;;ibuffer         ; interactive buffer management
        undo              ; persistent, smarter undo for your inevitable mistakes
        vc                ; version-control and Emacs, sitting in a tree
 
        :term
-       eshell            ; the elisp shell that works everywhere
+       ;;eshell            ; the elisp shell that works everywhere
        ;;shell             ; simple shell REPL for Emacs
        ;;term              ; basic terminal emulator for Emacs
-       vterm             ; the best terminal emulation in Emacs
+       ;;vterm             ; the best terminal emulation in Emacs
 
        :checkers
        syntax              ; tasing you for every semicolon you forget
-       (spell +everywhere +aspell); tasing you for misspelling mispelling
+       ;;(spell +flyspell) ; tasing you for misspelling mispelling
        ;;grammar           ; tasing grammar mistake every you make
 
        :tools
        ;;ansible
+       ;;biblio            ; Writes a PhD for you (citation needed)
        ;;debugger          ; FIXME stepping through code, to help you add bugs
-       direnv
-       (docker +lsp)
+       ;;direnv
+       ;;docker
        ;;editorconfig      ; let someone else argue about tabs vs spaces
-       ein               ; tame Jupyter notebooks with emacs
+       ;;ein               ; tame Jupyter notebooks with emacs
        (eval +overlay)     ; run code, run (also, repls)
-       gist              ; interacting with github gists
-       (lookup +dictionary + docsets +offline)              ; navigate your code and its documentation
-       lsp               ; M-x vscode
-       (magit +forge)             ; a git porcelain for Emacs
-       make              ; run make tasks from Emacs
-       (pass +auth)             ; password manager for nerds
-       pdf               ; pdf enhancements
+       ;;gist              ; interacting with github gists
+       lookup              ; navigate your code and its documentation
+       ;;lsp               ; M-x vscode
+       magit             ; a git porcelain for Emacs
+       ;;make              ; run make tasks from Emacs
+       ;;pass              ; password manager for nerds
+       ;;pdf               ; pdf enhancements
        ;;prodigy           ; FIXME managing external services & code builders
        ;;rgb               ; creating color strings
-       taskrunner        ; taskrunner for all your projects
+       ;;taskrunner        ; taskrunner for all your projects
        ;;terraform         ; infrastructure as code
-       tmux              ; an API for interacting with tmux
+       ;;tmux              ; an API for interacting with tmux
        ;;upload            ; map local to remote projects via ssh/ftp
 
        :os
-       ;;(:if IS-MAC macos)  ; improve compatibility with macOS
-       tty               ; improve the terminal Emacs experience
+       (:if IS-MAC macos)  ; improve compatibility with macOS
+       ;;tty               ; improve the terminal Emacs experience
 
        :lang
        ;;agda              ; types of types of types of types...
        ;;beancount         ; mind the GAAP
-       (cc +lsp)                ; C > C++ == 1
-       clojure           ; java with a lisp
-       common-lisp       ; if you've seen one lisp, you've seen them all
+       ;;(cc +lsp)         ; C > C++ == 1
+       ;;clojure           ; java with a lisp
+       ;;common-lisp       ; if you've seen one lisp, you've seen them all
        ;;coq               ; proofs-as-programs
        ;;crystal           ; ruby at the speed of c
-       csharp            ; unity, .NET, and mono shenanigans
+       ;;csharp            ; unity, .NET, and mono shenanigans
        ;;data              ; config/data formats
        ;;(dart +flutter)   ; paint ui and not much else
        ;;dhall
-       elixir            ; erlang done right
+       ;;elixir            ; erlang done right
        ;;elm               ; care for a cup of TEA?
        emacs-lisp        ; drown in parentheses
-       (erlang +lsp)            ; an elegant language for a more civilized age
+       ;;erlang            ; an elegant language for a more civilized age
        ;;ess               ; emacs speaks statistics
        ;;factor
        ;;faust             ; dsp, but you get to keep your soul
+       ;;fortran           ; in FORTRAN, GOD is REAL (unless declared INTEGER)
        ;;fsharp            ; ML stands for Microsoft's Language
        ;;fstar             ; (dependent) types and (monadic) effects and Z3
        ;;gdscript          ; the language you waited for
-       (go +lsp)         ; the hipster dialect
-       (haskell +lsp)  ; a language that's lazier than I am
+       ;;(go +lsp)         ; the hipster dialect
+       ;;(haskell +lsp)    ; a language that's lazier than I am
        ;;hy                ; readability of scheme w/ speed of python
        ;;idris             ; a language you can depend on
-       (json +lsp)              ; At least it ain't XML
-       (java +lsp) ; the poster child for carpal tunnel syndrome
-       javascript        ; all(hope(abandon(ye(who(enter(here))))))
-       (julia +lsp)             ; a better, faster MATLAB
+       ;;json              ; At least it ain't XML
+       ;;(java +lsp)       ; the poster child for carpal tunnel syndrome
+       ;;javascript        ; all(hope(abandon(ye(who(enter(here))))))
+       ;;julia             ; a better, faster MATLAB
        ;;kotlin            ; a better, slicker Java(Script)
-       latex             ; writing papers in Emacs has never been so fun
+       ;;latex             ; writing papers in Emacs has never been so fun
        ;;lean              ; for folks with too much to prove
        ;;ledger            ; be audit you can be
-       lua               ; one-based indices? one-based indices
+       ;;lua               ; one-based indices? one-based indices
        markdown          ; writing docs for people to ignore
        ;;nim               ; python + lisp at the speed of c
        ;;nix               ; I hereby declare "nix geht mehr!"
        ;;ocaml             ; an objective camel
-       ;;(org +roam2 +pretty)        ; organize your plain life in plain text
-       (org +roam2)        ; organize your plain life in plain text
+       org               ; organize your plain life in plain text
        ;;php               ; perl's insecure younger brother
        ;;plantuml          ; diagrams for confusing people more
        ;;purescript        ; javascript, but functional
-       (python +lsp +pyright +pyenv +poetry)
+       ;;python            ; beautiful is better than ugly
        ;;qt                ; the 'cutest' gui framework ever
        ;;racket            ; a DSL for DSLs
        ;;raku              ; the artist formerly known as perl6
-       rest              ; Emacs as a REST client
+       ;;rest              ; Emacs as a REST client
        ;;rst               ; ReST in peace
        ;;(ruby +rails)     ; 1.step {|i| p "Ruby is #{i.even? ? 'love' : 'life'}"}
-       (rust +lsp)              ; Fe2O3.unwrap().unwrap().unwrap().unwrap()
-       scala             ; java, but good
-       (scheme +guile +mit +racket)   ; a fully conniving family of lisps
+       ;;rust              ; Fe2O3.unwrap().unwrap().unwrap().unwrap()
+       ;;scala             ; java, but good
+       ;;(scheme +guile)   ; a fully conniving family of lisps
        sh                ; she sells {ba,z,fi}sh shells on the C xor
        ;;sml
        ;;solidity          ; do you need a blockchain? No.
        ;;swift             ; who asked for emoji variables?
        ;;terra             ; Earth and Moon in alignment for performance.
-       (web +lsp)               ; the tubes
-       yaml              ; JSON, but readable
+       ;;web               ; the tubes
+       ;;yaml              ; JSON, but readable
        ;;zig               ; C, but simpler
 
        :email
-       ;;(mu4e +gmail +org)
+       ;;(mu4e +org +gmail)
        ;;notmuch
        ;;(wanderlust +gmail)
 
diff --git a/doom-emacs/.doom.d/marivector.png b/doom-emacs/.doom.d/marivector.png
deleted file mode 100644
index b8f1426..0000000
Binary files a/doom-emacs/.doom.d/marivector.png and /dev/null differ
diff --git a/doom-emacs/.doom.d/packages.el b/doom-emacs/.doom.d/packages.el
index a282400..b80e9cc 100644
--- a/doom-emacs/.doom.d/packages.el
+++ b/doom-emacs/.doom.d/packages.el
@@ -48,13 +48,3 @@
 ;(unpin! pinned-package another-pinned-package)
 ;; ...Or *all* packages (NOT RECOMMENDED; will likely break things)
 ;(unpin! t)
-;;(package! elcord)
-(package! tree-sitter)
-(package! tree-sitter-langs)
-(unpin! org-roam)
-(package! websocket)
-(package! org-roam-ui :recipe (:host github :repo "org-roam/org-roam-ui" :files ("*.el" "out")))
-(package! magit-delta)
-(package! blamer :recipe (:host github :repo "artawower/blamer.el"))
-(package! all-the-icons-ivy-rich)
-(package! ivy-rich)
diff --git a/fish/.config/fish/completions/fisher.fish b/fish/.config/fish/completions/fisher.fish
deleted file mode 100644
index 6d23ce4..0000000
--- a/fish/.config/fish/completions/fisher.fish
+++ /dev/null
@@ -1,7 +0,0 @@
-complete --command fisher --exclusive --long help --description "Print help"
-complete --command fisher --exclusive --long version --description "Print version"
-complete --command fisher --exclusive --condition __fish_use_subcommand --arguments install --description "Install plugins"
-complete --command fisher --exclusive --condition __fish_use_subcommand --arguments update --description "Update installed plugins"
-complete --command fisher --exclusive --condition __fish_use_subcommand --arguments remove --description "Remove installed plugins"
-complete --command fisher --exclusive --condition __fish_use_subcommand --arguments list --description "List installed plugins matching regex"
-complete --command fisher --exclusive --condition "__fish_seen_subcommand_from update remove" --arguments "(fisher list)"
diff --git a/fish/.config/fish/config.fish b/fish/.config/fish/config.fish
index 2b1966c..913c02c 100644
--- a/fish/.config/fish/config.fish
+++ b/fish/.config/fish/config.fish
@@ -1,5 +1,8 @@
 set fish_greeting
-theme_gruvbox dark medium
+fish_vi_key_bindings
+set fish_bind_mode insert
+
+theme_gruvbox dark hard
 
 alias rm 'rm -i'
 alias nnn 'nnn -e'
@@ -24,8 +27,6 @@ set -gx XDG_CURRENT_DESKTOP sway
 set -gx MOZ_ENABLE_WAYLAND 1
 set -gx QT_AUTO_SCREEN_SCALE_FACTOR 1
 
-set -gx VDPAU_DRIVER va_gl
-
 set -Ux GTK_IM_MODULE ibus
 set -Ux QT_IM_MODULE ibus
 set -Ux XMODIFIERS @im=ibus
diff --git a/fish/.config/fish/fish_plugins b/fish/.config/fish/fish_plugins
deleted file mode 100644
index 54f49bf..0000000
--- a/fish/.config/fish/fish_plugins
+++ /dev/null
@@ -1,2 +0,0 @@
-jorgebucaran/fisher
-jomik/fish-gruvbox
diff --git a/fish/.config/fish/fish_variables b/fish/.config/fish/fish_variables
index 3d8b508..524f093 100644
--- a/fish/.config/fish/fish_variables
+++ b/fish/.config/fish/fish_variables
@@ -2,37 +2,35 @@
 # VERSION: 3.0
 SETUVAR --export GTK_IM_MODULE:ibus
 SETUVAR --export QT_IM_MODULE:ibus
-SETUVAR --export SSH_AGENT_PID:946
-SETUVAR --export SSH_AUTH_SOCK:/tmp/ssh\x2dXXXXXX6HJbdl/agent\x2e945
+SETUVAR --export SSH_AGENT_PID:1235
+SETUVAR --export SSH_AUTH_SOCK:/tmp/ssh\x2dXXXXXXRu0Qxq/agent\x2e1234
 SETUVAR --export XMODIFIERS:\x40im\x3dibus
 SETUVAR __fish_initialized:3100
-SETUVAR _fisher_jomik_2F_fish_2D_gruvbox_files:/home/minhradz/\x2econfig/fish/functions/theme_gruvbox\x2efish
-SETUVAR _fisher_jorgebucaran_2F_fisher_files:/home/minhradz/\x2econfig/fish/functions/fisher\x2efish\x1e/home/minhradz/\x2econfig/fish/completions/fisher\x2efish
-SETUVAR _fisher_plugins:jorgebucaran/fisher\x1ejomik/fish\x2dgruvbox
-SETUVAR fish_color_autosuggestion:555\x1ebrblack
+SETUVAR fish_color_autosuggestion:93a1a1
 SETUVAR fish_color_cancel:\x2dr
-SETUVAR fish_color_command:005fd7
-SETUVAR fish_color_comment:990000
+SETUVAR fish_color_command:586e75
+SETUVAR fish_color_comment:93a1a1
 SETUVAR fish_color_cwd:green
 SETUVAR fish_color_cwd_root:red
-SETUVAR fish_color_end:009900
-SETUVAR fish_color_error:ff0000
+SETUVAR fish_color_end:268bd2
+SETUVAR fish_color_error:dc322f
 SETUVAR fish_color_escape:00a6b2
 SETUVAR fish_color_history_current:\x2d\x2dbold
 SETUVAR fish_color_host:normal
 SETUVAR fish_color_host_remote:yellow
+SETUVAR fish_color_match:\x2d\x2dbackground\x3dbrblue
 SETUVAR fish_color_normal:normal
 SETUVAR fish_color_operator:00a6b2
-SETUVAR fish_color_param:00afff
-SETUVAR fish_color_quote:999900
-SETUVAR fish_color_redirection:00afff
-SETUVAR fish_color_search_match:bryellow\x1e\x2d\x2dbackground\x3dbrblack
+SETUVAR fish_color_param:657b83
+SETUVAR fish_color_quote:839496
+SETUVAR fish_color_redirection:6c71c4
+SETUVAR fish_color_search_match:bryellow\x1e\x2d\x2dbackground\x3dwhite
 SETUVAR fish_color_selection:white\x1e\x2d\x2dbold\x1e\x2d\x2dbackground\x3dbrblack
 SETUVAR fish_color_status:red
 SETUVAR fish_color_user:brgreen
 SETUVAR fish_color_valid_path:\x2d\x2dunderline
-SETUVAR fish_key_bindings:fish_default_key_bindings
-SETUVAR fish_pager_color_completion:\x1d
-SETUVAR fish_pager_color_description:B3A06D\x1eyellow
-SETUVAR fish_pager_color_prefix:normal\x1e\x2d\x2dbold\x1e\x2d\x2dunderline
+SETUVAR fish_key_bindings:fish_vi_key_bindings
+SETUVAR fish_pager_color_completion:green
+SETUVAR fish_pager_color_description:B3A06D
+SETUVAR fish_pager_color_prefix:cyan\x1e\x2d\x2dunderline
 SETUVAR fish_pager_color_progress:brwhite\x1e\x2d\x2dbackground\x3dcyan
diff --git a/fish/.config/fish/functions/fisher.fish b/fish/.config/fish/functions/fisher.fish
deleted file mode 100644
index 72203a2..0000000
--- a/fish/.config/fish/functions/fisher.fish
+++ /dev/null
@@ -1,211 +0,0 @@
-function fisher --argument-names cmd --description "A plugin manager for Fish"
-    set --query fisher_path || set --local fisher_path $__fish_config_dir
-    set --local fisher_version 4.3.1
-    set --local fish_plugins $__fish_config_dir/fish_plugins
-
-    switch "$cmd"
-        case -v --version
-            echo "fisher, version $fisher_version"
-        case "" -h --help
-            echo "Usage: fisher install <plugins...>  Install plugins"
-            echo "       fisher remove  <plugins...>  Remove installed plugins"
-            echo "       fisher update  <plugins...>  Update installed plugins"
-            echo "       fisher update                Update all installed plugins"
-            echo "       fisher list    [<regex>]     List installed plugins matching regex"
-            echo "Options:"
-            echo "       -v or --version  Print version"
-            echo "       -h or --help     Print this help message"
-            echo "Variables:"
-            echo "       \$fisher_path  Plugin installation path. Default: ~/.config/fish"
-        case ls list
-            string match --entire --regex -- "$argv[2]" $_fisher_plugins
-        case install update remove
-            isatty || read --local --null --array stdin && set --append argv $stdin
-
-            set --local install_plugins
-            set --local update_plugins
-            set --local remove_plugins
-            set --local arg_plugins $argv[2..-1]
-            set --local old_plugins $_fisher_plugins
-            set --local new_plugins
-
-            if ! set --query argv[2]
-                if test "$cmd" != update
-                    echo "fisher: Not enough arguments for command: \"$cmd\"" >&2 && return 1
-                else if test ! -e $fish_plugins
-                    echo "fisher: \"$fish_plugins\" file not found: \"$cmd\"" >&2 && return 1
-                end
-                set arg_plugins (string match --regex -- '^[^\s]+$' <$fish_plugins)
-            end
-
-            for plugin in $arg_plugins
-                test -e "$plugin" && set plugin (realpath $plugin)
-                contains -- "$plugin" $new_plugins || set --append new_plugins $plugin
-            end
-
-            if set --query argv[2]
-                for plugin in $new_plugins
-                    if contains -- "$plugin" $old_plugins
-                        test "$cmd" = remove &&
-                            set --append remove_plugins $plugin ||
-                            set --append update_plugins $plugin
-                    else if test "$cmd" = install
-                        set --append install_plugins $plugin
-                    else
-                        echo "fisher: Plugin not installed: \"$plugin\"" >&2 && return 1
-                    end
-                end
-            else
-                for plugin in $new_plugins
-                    contains -- "$plugin" $old_plugins &&
-                        set --append update_plugins $plugin ||
-                        set --append install_plugins $plugin
-                end
-
-                for plugin in $old_plugins
-                    contains -- "$plugin" $new_plugins || set --append remove_plugins $plugin
-                end
-            end
-
-            set --local pid_list
-            set --local source_plugins
-            set --local fetch_plugins $update_plugins $install_plugins
-            echo (set_color --bold)fisher $cmd version $fisher_version(set_color normal)
-
-            for plugin in $fetch_plugins
-                set --local source (command mktemp -d)
-                set --append source_plugins $source
-
-                command mkdir -p $source/{completions,conf.d,functions}
-
-                fish --command "
-                    if test -e $plugin
-                        command cp -Rf $plugin/* $source
-                    else
-                        set temp (command mktemp -d)
-                        set name (string split \@ $plugin) || set name[2] HEAD
-                        set url https://codeload.github.com/\$name[1]/tar.gz/\$name[2]
-
-                        echo Fetching (set_color --underline)\$url(set_color normal)
-
-                        if curl --silent \$url | tar -xzC \$temp -f - 2>/dev/null
-                            command cp -Rf \$temp/*/* $source
-                        else
-                            echo fisher: Invalid plugin name or host unavailable: \\\"$plugin\\\" >&2
-                            command rm -rf $source
-                        end
-                        command rm -rf \$temp
-                    end
-
-                    set files $source/* && string match --quiet --regex -- .+\.fish\\\$ \$files
-                " &
-
-                set --append pid_list (jobs --last --pid)
-            end
-
-            wait $pid_list 2>/dev/null
-
-            for plugin in $fetch_plugins
-                if set --local source $source_plugins[(contains --index -- "$plugin" $fetch_plugins)] && test ! -e $source
-                    if set --local index (contains --index -- "$plugin" $install_plugins)
-                        set --erase install_plugins[$index]
-                    else
-                        set --erase update_plugins[(contains --index -- "$plugin" $update_plugins)]
-                    end
-                end
-            end
-
-            for plugin in $update_plugins $remove_plugins
-                if set --local index (contains --index -- "$plugin" $_fisher_plugins)
-                    set --local plugin_files_var _fisher_(string escape --style=var -- $plugin)_files
-
-                    if contains -- "$plugin" $remove_plugins
-                        for name in (string replace --filter --regex -- '.+/conf\.d/([^/]+)\.fish$' '$1' $$plugin_files_var)
-                            emit {$name}_uninstall
-                        end
-                        printf "%s\n" Removing\ (set_color red --bold)$plugin(set_color normal) "         "$$plugin_files_var
-                    end
-
-                    command rm -rf $$plugin_files_var
-                    functions --erase (string replace --filter --regex -- '.+/functions/([^/]+)\.fish$' '$1' $$plugin_files_var)
-
-                    for name in (string replace --filter --regex -- '.+/completions/([^/]+)\.fish$' '$1' $$plugin_files_var)
-                        complete --erase --command $name
-                    end
-
-                    set --erase _fisher_plugins[$index]
-                    set --erase $plugin_files_var
-                end
-            end
-
-            if set --query update_plugins[1] || set --query install_plugins[1]
-                command mkdir -p $fisher_path/{functions,conf.d,completions}
-            end
-
-            for plugin in $update_plugins $install_plugins
-                set --local source $source_plugins[(contains --index -- "$plugin" $fetch_plugins)]
-                set --local files $source/{functions,conf.d,completions}/*
-
-                if set --local index (contains --index -- $plugin $install_plugins)
-                    set --local user_files $fisher_path/{functions,conf.d,completions}/*
-                    set --local conflict_files
-
-                    for file in (string replace -- $source/ $fisher_path/ $files)
-                        contains -- $file $user_files && set --append conflict_files $file
-                    end
-
-                    if set --query conflict_files[1] && set --erase install_plugins[$index]
-                        echo -s "fisher: Cannot install \"$plugin\": please remove or move conflicting files first:" \n"        "$conflict_files >&2
-                        continue
-                    end
-                end
-
-                for file in (string replace -- $source/ "" $files)
-                    command cp -Rf $source/$file $fisher_path/$file
-                end
-
-                set --local plugin_files_var _fisher_(string escape --style=var -- $plugin)_files
-                set --query files[1] && set --universal $plugin_files_var (string replace -- $source $fisher_path $files)
-
-                contains -- $plugin $_fisher_plugins || set --universal --append _fisher_plugins $plugin
-                contains -- $plugin $install_plugins && set --local event install || set --local event update
-
-                printf "%s\n" Installing\ (set_color --bold)$plugin(set_color normal) "           "$$plugin_files_var
-
-                for file in (string match --regex -- '.+/[^/]+\.fish$' $$plugin_files_var)
-                    source $file
-                    if set --local name (string replace --regex -- '.+conf\.d/([^/]+)\.fish$' '$1' $file)
-                        emit {$name}_$event
-                    end
-                end
-            end
-
-            command rm -rf $source_plugins
-
-            set --query _fisher_plugins[1] || set --erase _fisher_plugins
-            set --query _fisher_plugins &&
-                printf "%s\n" $_fisher_plugins >$fish_plugins ||
-                command rm -f $fish_plugins
-
-            set --local total (count $install_plugins) (count $update_plugins) (count $remove_plugins)
-            test "$total" != "0 0 0" && echo (string join ", " (
-                test $total[1] = 0 || echo "Installed $total[1]") (
-                test $total[2] = 0 || echo "Updated $total[2]") (
-                test $total[3] = 0 || echo "Removed $total[3]")
-            ) plugin/s
-        case \*
-            echo "fisher: Unknown command: \"$cmd\"" >&2 && return 1
-    end
-end
-
-## Migrations ##
-function _fisher_fish_postexec --on-event fish_postexec
-    if functions --query _fisher_list
-        fisher update >/dev/null 2>/dev/null
-        set --query XDG_DATA_HOME || set --local XDG_DATA_HOME ~/.local/share
-        test -e $XDG_DATA_HOME/fisher && command rm -rf $XDG_DATA_HOME/fisher
-        functions --erase _fisher_list _fisher_plugin_parse
-        set --erase fisher_data
-    end
-    functions --erase _fisher_fish_postexec
-end
diff --git a/git/.gitconfig b/git/.gitconfig
index ba6b3ae..77381f4 100644
--- a/git/.gitconfig
+++ b/git/.gitconfig
@@ -19,8 +19,6 @@
 [delta]
     side-by-side = true
     line-numbers = true
-    plus-style = "syntax #012800"
-    minus-style = "syntax #340001"
     syntax-theme = gruvbox-dark
     navigate = true
 
diff --git a/kitty/.config/kitty/gruvbox_dark.conf b/kitty/.config/kitty/gruvbox_dark.conf
deleted file mode 100644
index afd0147..0000000
--- a/kitty/.config/kitty/gruvbox_dark.conf
+++ /dev/null
@@ -1,55 +0,0 @@
-# Based on https://github.com/morhetz/gruvbox by morhetz <morhetz@gmail.com>
-# Adapted to kitty by wdomitrz <witekdomitrz@gmail.com>
-
-cursor                  #928374
-cursor_text_color       background
-
-url_color               #83a598
-
-visual_bell_color       #8ec07c
-bell_border_color       #8ec07c
-
-active_border_color     #d3869b
-inactive_border_color   #665c54
-
-background              #282828
-foreground              #fbf1c7
-selection_foreground    #928374
-selection_background    #ebdbb2
-
-active_tab_foreground   #fbf1c7
-active_tab_background   #665c54
-inactive_tab_foreground #a89984
-inactive_tab_background #3c3836
-
-# black
-color0                  #282828
-color8                  #7c6f64
-
-# red
-color1                  #cc241d
-color9                  #fb4934
-
-#: green
-color2                  #98971a
-color10                 #b8bb26
-
-# yellow
-color3                  #d79921
-color11                 #fabd2f
-
-# blue
-color4                  #458588
-color12                 #83a598
-
-# purple
-color5                  #b16286
-color13                 #d3869b
-
-# aqua
-color6                  #689d6a
-color14                 #8ec07c
-
-# white
-color7                  #a89984
-color15                 #fbf1c7
diff --git a/kitty/.config/kitty/gruvbox_light.conf b/kitty/.config/kitty/gruvbox_light.conf
new file mode 100644
index 0000000..506df77
--- /dev/null
+++ b/kitty/.config/kitty/gruvbox_light.conf
@@ -0,0 +1,55 @@
+# Based on https://github.com/morhetz/gruvbox by morhetz <morhetz@gmail.com>
+# Adapted to kitty by wdomitrz <witekdomitrz@gmail.com>
+
+cursor                  #928374
+cursor_text_color       background
+
+url_color               #458588
+
+visual_bell_color       #689d6a
+bell_border_color       #689d6a
+
+active_border_color     #b16286
+inactive_border_color   #1d2021
+
+background              #fbf1c7
+foreground              #282828
+selection_foreground    #928374
+selection_background    #3c3836
+
+active_tab_foreground   #282828
+active_tab_background   #928374
+inactive_tab_foreground #7c6f64
+inactive_tab_background #ebdbb2
+
+# white
+color0                  #fbf1c7
+color8                  #282828
+
+# red
+color1                  #cc241d
+color9                  #9d0006
+
+# green
+color2                  #98971a
+color10                 #79740e
+
+# yellow
+color3                  #d79921
+color11                 #b57614
+
+# blue
+color4                  #458588
+color12                 #076678
+
+# purple
+color5                  #b16286
+color13                 #8f3f71
+
+# aqua
+color6                  #689d6a
+color14                 #427b58
+
+# black
+color7                  #7c6f64
+color15                 #282828
diff --git a/kitty/.config/kitty/kitty.conf b/kitty/.config/kitty/kitty.conf
index 45729dc..66afd5e 100644
--- a/kitty/.config/kitty/kitty.conf
+++ b/kitty/.config/kitty/kitty.conf
@@ -2,7 +2,7 @@ term xterm-kitty
 
 shell fish
 
-font_family 	JetBrainsMono Nerd Font Mono
+font_family 	JetBrainsMono Nerd Font
 bold_font        auto
 italic_font      auto
 bold_italic_font auto
@@ -46,4 +46,4 @@ map ctrl+right neighboring_window right
 map ctrl+up neighboring_window up
 map ctrl+down neighboring_window down
 
-include gruvbox_dark.conf
+include gruvbox_light.conf
diff --git a/lvim/.config/lvim/config.lua b/lvim/.config/lvim/config.lua
index 8343f6e..4815a9c 100644
--- a/lvim/.config/lvim/config.lua
+++ b/lvim/.config/lvim/config.lua
@@ -3,18 +3,20 @@ lvim.format_on_save = true
 lvim.lint_on_save = true
 lvim.shell = "/bin/fish"
 lvim.leader = "space"
-lvim.builtin.dashboard.active = true
+vim.opt.relativenumber = true
+
+lvim.builtin.alpha.active = true
 lvim.builtin.terminal.active = true
 lvim.builtin.autopairs.active = true
 lvim.builtin.gitsigns.active = true
 lvim.builtin.dap.active = true
-vim.opt.relativenumber = true
+
 lvim.builtin.nvimtree.side = "left"
 lvim.builtin.nvimtree.show_icons.git = 1
 lvim.builtin.terminal.shell = "/bin/fish"
 
 vim.termguicolors = true
-vim.background = "dark"
+vim.background = "light"
 lvim.colorscheme = "gruvbox"
 
 lvim.builtin.treesitter.ensure_installed = {}
@@ -68,6 +70,7 @@ lvim.plugins = {
 		end,
 	},
 	{ "ggandor/lightspeed.nvim", requires = { "tpope/vim-repeat" }, event = "InsertEnter" },
+	{ "ellisonleao/glow.nvim" },
 }
 
 -- Changes to clangd
diff --git a/newsboat/.newsboat/cache.db.lock b/newsboat/.newsboat/cache.db.lock
new file mode 100644
index 0000000..979cf83
--- /dev/null
+++ b/newsboat/.newsboat/cache.db.lock
@@ -0,0 +1 @@
+114070
\ No newline at end of file
diff --git a/newsboat/.newsboat/urls b/newsboat/.newsboat/urls
index 088e3ee..f2da4b0 100644
--- a/newsboat/.newsboat/urls
+++ b/newsboat/.newsboat/urls
@@ -1,6 +1,7 @@
 http://lukesmith.xyz/rss.xml "Technology"
 http://www.vox.com/rss/policy-and-politics/index.xml "Politics"
 https://based.cooking/rss.xml "Cooking"
-http://cyberciti.biz/feed "Technology"
 https://medium.com/feed/better-programming "Technology"
 https://protesilaos.com/codelog.xml "Technology"
+https:///notrelated.xyz/rss.xml "Politics"
+https://hnrss.org/frontpage "Technology"
diff --git a/nwg-launchers/.config/nwg-launchers/nwgbar/bar.json b/nwg-launchers/.config/nwg-launchers/nwgbar/bar.json
new file mode 100644
index 0000000..bc9479f
--- /dev/null
+++ b/nwg-launchers/.config/nwg-launchers/nwgbar/bar.json
@@ -0,0 +1,22 @@
+[
+  {
+    "name": "Lock screen",
+    "exec": "swaylock -f -c 000000",
+    "icon": "system-lock-screen"
+  },
+  {
+    "name": "Logout",
+    "exec": "swaymsg exit",
+    "icon": "system-log-out"
+  },
+  {
+    "name": "Reboot",
+    "exec": "systemctl reboot",
+    "icon": "system-reboot"
+  },
+  {
+    "name": "Shutdown",
+    "exec": "systemctl -i poweroff",
+    "icon": "system-shutdown"
+  }
+]
diff --git a/nwg-launchers/.config/nwg-launchers/nwgbar/style.css b/nwg-launchers/.config/nwg-launchers/nwgbar/style.css
new file mode 100644
index 0000000..871ec03
--- /dev/null
+++ b/nwg-launchers/.config/nwg-launchers/nwgbar/style.css
@@ -0,0 +1,28 @@
+#bar {
+    margin: 30px /* affects top/bottom & left/right alignment */
+}
+
+button, image {
+    background: none;
+    border-style: none;
+    box-shadow: none;
+    color: #999
+}
+
+button {
+    padding-left: 10px;
+    padding-right: 10px;
+    margin: 5px
+}
+
+button:hover {
+    background-color: rgba (255, 255, 255, 0.1)
+}
+
+button:focus {
+    box-shadow: 0 0 2px;
+}
+
+grid {
+    /* e.g. for common background to all buttons */
+}
diff --git a/sway/.config/sway/config b/sway/.config/sway/config
index 494b1da..35c0baa 100644
--- a/sway/.config/sway/config
+++ b/sway/.config/sway/config
@@ -85,9 +85,6 @@ for_window [app_id="soffice.bin"] inhibit_idle visible; border none; max_render_
 for_window [class="firefox"] inhibit_idle fullscreen; max_render_time off
 for_window [app_id="firefox"] inhibit_idle fullscreen; max_render_time off
 for_window [app_id="jellyfinmediaplayer"] inhibit_idle fullscreen; max_render_time off
-# This will lock your screen after 300 seconds of inactivity, then turn off
-# your displays after another 300 seconds, and turn your screens back on when
-# resumed. It will also lock your screen before your computer goes to sleep.
 
 ### Input configuration
 #
@@ -122,10 +119,12 @@ for_window [app_id="jellyfinmediaplayer"] inhibit_idle fullscreen; max_render_ti
     bindsym $mod+Shift+c reload
 
     # Exit sway (logs you out of your Wayland session)
-    bindsym $mod+Shift+e exec exec nwgbar
+    bindsym $mod+Shift+e exec exec wlogout
 
     # clipboard manager
     bindsym $mod+p exec clipman pick -t wofi
+
+    bindsym $mod+t exec firefox
 #
 # Moving around:
 #
@@ -186,7 +185,6 @@ for_window [app_id="jellyfinmediaplayer"] inhibit_idle fullscreen; max_render_ti
 
     # Switch the current container between different layout styles
     bindsym $mod+s layout stacking
-    bindsym $mod+t layout toggle split
 
     bindsym $mod+Shift+space floating toggle
     # Make the current focus fullscreen
diff --git a/wlogout/.config/wlogout/layout b/wlogout/.config/wlogout/layout
index d364253..0797655 100644
--- a/wlogout/.config/wlogout/layout
+++ b/wlogout/.config/wlogout/layout
@@ -1,23 +1,24 @@
 {
     "label" : "lock",
-    "action" : "swaylock -i ~/Downloads/william-moreland-W61Rp5RouCA-unsplash.png .s fill",
+    "action" : "swaylock -c ~/.config/swaylock/config",
     "text" : "Lock",
     "keybind" : "l"
 }
 {
     "label" : "hibernate",
-    "action" : "systemctl suspend",
+    "action" : "systemctl hibernate",
     "text" : "Hibernate",
+    "keybind" : "h"
 }
 {
     "label" : "logout",
-    "action" : "swaymsg exit",
+    "action" : "loginctl terminate-user $USER",
     "text" : "Logout",
     "keybind" : "e"
 }
 {
     "label" : "shutdown",
-    "action" : "shutdown now",
+    "action" : "systemctl poweroff",
     "text" : "Shutdown",
     "keybind" : "s"
 }
diff --git a/wlogout/.config/wlogout/style.css b/wlogout/.config/wlogout/style.css
index c9b7798..65c103a 100644
--- a/wlogout/.config/wlogout/style.css
+++ b/wlogout/.config/wlogout/style.css
@@ -1,52 +1,51 @@
 * {
-	background-image: none;
-}
-@keyframes fadeIn {
-  from {opacity: 0;}
-  to {opacity: 1;}
+    background-image: none;
 }
 window {
-  background-color: rgba(46,52,64, 0.9);
-  font-size: 26px;
-  font-family: Product Sans;
-  animation: fadeIn;
-  animation-duration: 0.5s;
+    background-image: image(url("/home/minhradz/Downloads/lantern.jpg"), url("/home/minhradz/Downloads/lantern.jpg"));
 }
 button {
-  color: #eceff4;
-  background-color: #4c566a;
-	border-style: solid;
-  margin: 20px;
-  border: 3px solid #3b4252;
-	background-repeat: no-repeat;
-	background-position: center;
+    background-color: #2e3440;
+    border-width: 0px;
+    border-radius: 0;
+    background-repeat: no-repeat;
+    background-position: center;
+    background-size: 25%;
+    color: #5e81ac;
 }
 
-button:focus, button:active, button:hover {
-  background-color: #5e81ac;
-	outline-style: none;
+button:active, button:hover {
+    background-color: #4c566a;
+    color: #81a1c1;
+    outline-style: none;
 }
 
 #lock {
-    background-image: image(url("/home/minhradz/.config/wlogout/icons/lock.png"), url("/usr/local/share/wlogout/icons/lock.png"));
+    opacity: 0.9;
+    background-image: image(url("/usr/share/wlogout/icons/logout.png"), url("/usr/share/wlogout/icons/logout.png"));
 }
 
 #logout {
-    background-image: image(url("/home/minhradz/.config/wlogout/icons/logout.png"), url("/usr/local/share/wlogout/icons/logout.png"));
+    opacity: 0.9;
+    background-image: image(url("/usr/share/wlogout/icons/logout.png"), url("/usr/local/share/wlogout/icons/logout.png"));
 }
 
 #suspend {
-    background-image: image(url("/home/minhradz/.config/wlogout/icons/suspend.png"), url("/usr/local/share/wlogout/icons/suspend.png"));
+    opacity: 0.9;
+    background-image: image(url("/usr/share/wlogout/icons/suspend.png"), url("/usr/local/share/wlogout/icons/suspend.png"));
 }
 
 #hibernate {
-    background-image: image(url("/home/minhradz/.config/wlogout/icons/hibernate.png"), url("/usr/local/share/wlogout/icons/hibernate.png"));
+    opacity: 0.9;
+    background-image: image(url("/usr/share/wlogout/icons/hibernate.png"), url("/usr/local/share/wlogout/icons/hibernate.png"));
 }
 
 #shutdown {
-    background-image: image(url("/home/minhradz/.config/wlogout/icons/shutdown.png"), url("/usr/local/share/wlogout/icons/shutdown.png"));
+    opacity: 0.9;
+    background-image: image(url("/usr/share/wlogout/icons/shutdown.png"), url("/usr/local/share/wlogout/icons/shutdown.png"));
 }
 
 #reboot {
-    background-image: image(url("/home/minhradz/.config/wlogout/icons/reboot.png"), url("/usr/local/share/wlogout/icons/reboot.png"));
+    opacity: 0.9;
+    background-image: image(url("/usr/share/wlogout/icons/reboot.png"), url("/usr/local/share/wlogout/icons/reboot.png"));
 }